www.tpctraining.com 

http://www.tpctraining.com/courses/catalog_course.asp?Course=148  Series 460: Ammonia Refrigeration Course 462: Positive-Displacement Compressors Begins with coverage of reciprocating compressors-their design, lubrication, efficiency, and application. Covers rotary vane compressor operation and limitations. Details screw compressors and the operation of related drive, lubrication, capacity control, and safety systems. Discusses oils and the importance of system lubrication. Available Media: E-Learning, Self-Study Textbook, Pre- and Post- Tests Lesson 1, Reciprocating Compressors Topics: Features of industrial ammonia reciprocating compressors; Capacity control; Lubrication; Efficiency; Application data; Compound compressors Learning Objectives: After studying this lesson, you should be able to Briefly describe the evolution of ammonia reciprocating compressors. Describe typical design features of today's reciprocating compressors. Explain how capacity control and proper lubrication are achieved in ammonia reciprocating compressors. Explain how to use volumetric and adiabatic efficiency data and the performance factor in sizing or selecting compressors for an application. Describe the function and basic design requirements of internally compounded reciprocating compressors. Lesson 2, Sliding-Vane Rotary Booster Compressors - Topics: Rotary vane compressor design and operation; Fixed volume ratio; Applicability; Limitations; Capacity control Learning Objectives: After studying this lesson, you should be able to Describe the basic operation of sliding-vane rotary booster compressors. Explain the principle of fixed volume ratio compressors. Describe typical rotary compressor design features. Explain why sliding-vane rotary compressors have been replaced by screw compressors. Discuss the reasons for rotary vane compressor speed limitations and the causes and effects of blade wear. Describe how capacity control is achieved in rotary compressors. Lesson 3, Oil-Flooded Screw Compressors Topics: Oil-flooded screw compressor operation; Fixed volume ratio; Capacity control in fixed, variable compressors; Efficiency; Compound compressors; Application criteria Learning Objectives: After studying this lesson, you should be able to Discuss the developments that led to the use and acceptance of the oil-flooded screw compressor in industrial refrigeration. Describe typical design features of single-screw and twin helical screw compressors. Explain how the compression system works within screw compressors. Compare fixed and variable volume machines and their applications. Explain how the capacity-control slide valve and variable Vi slide stop function. Describe the general range of application for screw compressors. Lesson 4, Screw Compressor Units Topics: Screw compressor systems; Drive systems; Lubrication, refrigerant/oil separation, oil cooling, economizer/side load, capacity control, microprocessor control, and safety systems Learning Objectives: After studying this lesson, you should be able to Explain why screw compressors are provided as units and describe the main systems that make up the screw compressor unit. Explain why a vertical or horizontal oil separator may be preferred and explain why check valves are used on the unit inlet and outlet connections. Discuss drive methods and oil distribution methods used on screw compressors and describe tasks provided by the lubricant within the compressor. Explain how the refrigerant vapor/oil separation system operates and list the methods and benefits of oil cooling in screw compressor units. Discuss the beneficial uses of the side port and the operation of the screw compressor capacity reduction slide valve control system. Name the codes and other criteria with which ammonia refrigeration systems must comply to establish and maintain a safe work environment. Lesson 5, Ammonia Systems Lubrication/Oil Management Topics: Need for lubrication; Miscibility; Viscosity; Lubricants and oils; Lubricant selection, handling and management; Separators; Low-side oil recovery Learning Objectives: After studying this lesson, you should be able to Discuss the purposes of lubricants in ammonia systems. Define the terms used to describe and specify lubricants and oils and discuss the importance of the miscibility and viscosity relationships between lubricants and ammonia. Describe the proper methods for handling lubricants. Explain how oil is separated from the refrigerant vapor within the screw compressor system. Describe the IIAR-approved method for removing oil from the system low-side oil pots. Name lubricants recommended for use with ammonia systems and explain the importance of using only specified lubrication products.